Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hybrid S464 - (PC+ABS) - Ravago Manufacturing Americas

Material Data Center offers the following functions for Hybrid S464:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hybrid S datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 2.2 cm³/10min ISO 1133
Température 230 °C -
Charge 3.8 kg -
Retrait au moulage, parallèle 0.6 % ISO 294-4, 2577
ASTM Data
Indice de fluidité, MFI 2.5 g/10min ASTM D 1238
Température 230 °C -
Charge 3.8 kg -
Retrait au moulage , parallèle 0.006 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Contrainte d'écoulement 54 MPa ISO 527
Déformation à la rupture >50 % ISO 527
Module de flexion, 23°C 2300 MPa ISO 178
Résistance au choc Izod avec entaille, +23°C 43 kJ/m² ISO 180/1A
ASTM Data
Module de traction d’élasticité 55.2 MPa ASTM D 638
Allongement à la rupture 60 % ASTM D 638
Module de flexion 2340 MPa ASTM D 790
Izod choc avec entaille, 1/8 in 610 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 112 °C ISO 75-1/-2
ASTM Data
UL 94 inflammabilité HB - UL 94
Épaisseur testée 1.5 mm -
DTUL à 264 psi 110 °C ASTM D 648
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1120 kg/m³ ISO 1183
Absorption d’eau, 24hr 0.09 % ASTM D 570
Densité 1120 kg/m³ ASTM D 792
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Granulés
Applications
General Purpose
Disponibilité régionale
Amérique du nord
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.